2. Safety Precautions for Machine Operation
 |
Be sure to use goggles to prevent eye injury from metal chips and dusts. Use a safety mask to prevent exposure from inhalable elements and particles. |
|
Protect your fingers, hands and wrists
during operation. The engraving cutter of the machine is sharp and may cause cuts and/or serious injuries if get caught in between the axis. |
|
Be sure to use a Chip collector to
remove the particle s produced during
engraving process. Debris like metal chips and dusts may cause serious eye injury if they get stuck in the eye, and may cause respiratory problems if inhaled. |
|
Do not put any foreign objects or any fire
hazards on the machine. Never put the machine near or above any heating devices or any flammable materials. |
|
Be sure to place the machine on a firm, flat
and level surface. If the machine is not properly installed or placed, the machine may fall, causing physical injury, electric shock or fire. |
|
Be sure to keep the machine out of children ’s reach and sight . Children’s curiosity may lead to injury. |
|
Do not disassemble , assemble or modify
the machine. This can lead to machine failure and damage, caus ing fire or electric shock. Please contact our technical support for proper diagnosis and inspection, calibration and repair. |
|
Avoid spilling water or any liquids on the
machine. This may result to machine failure and damage , causing electric shock or fire. If any liquids or foreign objects get s inside the machine, the machine may vibrate excessively then fall. This may cause injury. |
|
Protect your hands, wrists and fingers. Do not let any of your body parts or any foreign objects get caught in the machine during operation. The tools of the machine are sharp, and may cause serious physical injury. |
|
Do not put any foreign objects or any tiny
metals inside the machine. This may result to machine failure and damage, causing fire or electric shock. |
|
If there is smoke, moisture, oil, dust or
water in the place where the machine is
installed, do not use the machine. This may cause electric shock or fire. |
 |
Use the machine properly and strictly
follow the safety precautions. We will not be held responsible for any damage s or injuries caused by mishandling or misuse of the machine. |
|
Avoid using materials that may get caught or
jammed in the machine. The e ngraving and cutting p erformance and quality of the machine may vary depending on the materials used |
|
Do not attempt to disassemble and clean
the machine if the machine suddenly
generates some type of lubricant oil. Contact our technical support immediately. |