The package includes a multifunctional clamp that is easily assembled, disassembled and transformed into 3 different types of clamps. It can be adjusted according to the height of the material, and can be expanded according to the material’s thickness, size, and shape. This single clamp alone makes engraving on various materials possible without the use of any additional clamps.

How to secure the material in place

Use the clamping knob to secure your material in place. To loosen or widen the clamp, turn the clamping knob counterclockwise; to fasten it, turn the knob clockwise.

Marks may be left on the material if fastened tightly.

How to position the material

Use the vertical ruler bar as an alignment guide to help you position and align your material to the clamp with ease and accuracy. Properly place your material on the clamp then check the alignment.

How to secure the material with irregular shape in place

Use the clamping pins to firmly hold materials with irregular shapes in place. To secure the clamping pins to the clamp, simply insert the pins into the pin holes then fasten them.

How to adjust the height of the clamp

Below are instructions on how to adjust the height of the clamp according to the thickness of the material.

1. Turn the clamp over (to the back) then screw the bolts (M4x20mm). ※Use a 3mm L-wrench to screw the bolts.

2. Turn the clamp over (to the front) then pull out the clamp base.

3. Remove the clamping pins then secure the material to the V groove of clamp without clamp base. (See picture below for reference).

Height Adjustable Clamp

Height adjustable clamp is used to adjust the height of your material.

Height adjustable clamp (CP-252)

1EA

To adjust the height of the clamp.

1. Turn the Height Adjustable clamp clamping knob counterclockwise to detach the Multipurpose Clamp.

2. Turn the clamping knob counterclockwise to detach the height adjustable clamp.

3. Attach the multipurpose clamp then fasten it by turning the clamping knob clockwise.

Optional items for Multipurpose Clamp

• 1. Pin clamp CP-80
  
  
• 2. Cutlery clamp CP-83
  
  
• 3. Watch adapter CP-84
  
  
• 4. Bracelet adapter CP-85
  
  
• 5. Bar necklace adapter CP-166
  
  
• 6. Brick adapter CP-167, 167S
  
  
• 7. Curved tag adapter CP-182
  
  

Go to the E3 Descriptions➜