Tension tool
| L-wrench(1.5mm) (CP-L15) |
 |
1EA | Tool for tightening/replacement of bolt. |
| Tension tip(4Ø) (T40-TA20) |
 |
1EA | Tool for engraving of material. (For spindle) |
It is necessary to use a tension tool as engraving with a diamond/carbide tip tool requires more pressure.
How to adjust the pressure
When engraving with a tension tool, the engraving depth is adjusted by pressure. This has the same effect as assigning the engraving depth when creating a tool path. To increase pressure, turn the tension adjustment bolt counterclockwise (with a 1.5mm L-wrench). To decrease pressure, turn it clockwise.
How to assemble the tension tip
First, insert the tension tip (2Ø) into the tip (4Ø). Then, insert the spring. Lastly, insert the bolt then screw it with a 1.5mm L-wrench.
*Be sure to screw the bolt deep until it reaches the tool’s end. The bolt must appear even and/or aligned to the tension tool.