For Electrical System

	Safety Precautions for Electrical System
	Do not use a damaged power cord or a loose electrical outlet. This may cause electric shock or fire.
	Do not plug in two or more devices in a single outlet simultaneously. Overloading your plug sockets may lead to overheating which may cause fire.
	Do not pull a plug by the cord. Do not grab a plug with wet hands. This may cause electric shock and burns.
	To disconnect the AC adapter from the product, first. Turn off the machine and then unplug the AC adapter.
	If smoke comes out of the machine, switch off the machine immediately. Do not attempt to repair and/or disassemble the machine, contact our authorized technical support for immediate diagnosis and repair.
	This machine is designed to operate on a power supply of 100 to 240 volts. The device will not work correctly if you use a non-AC power source.
	Unplug the machine when not in use.
	Plug the machine into a grounded outlet only. The machine may fail if plugged into an ungrounded outlet, causing property damage, physical injuries, electric shock or fire.

For installation

	Safety precautions for installation
	Be sure to place the machine on a firm, flat and level surface. If the machine is not properly installed or placed, the machine may fall, causing physical injury, electric shock or fire.
	Do not put any foreign objects or any fire hazards on the machine. Never put the machine near or above any heating devices or any flammable materials.
	If there is smoke, moisture, oil, dust or water in the place where the machine is installed, do not use the machine. This may cause electric shock or fire.
	When installing the product, make sure there is enough space at the back for proper ventilation. If you don't, the product might not work right or get damaged.

General precautions

	General precautions
	Be sure to keep the machine out of children’s reach and sight. Children’s curiosity may lead to injury.
	Avoid spilling water or any liquids on the machine. This may result to machine failure and damage, causing electric shock or fire. If any liquids or foreign objects gets inside the machine, the machine may vibrate excessively then fall. This may cause injury.
	Do not disassemble or modify the internal components of the machine. This may result in fire, electric shock, or equipment failure. For inspection, adjustment, or repair, please contact the place of purchase or an authorized authorized technical support.
	Be sure that the machine is placed and kept in a room temperature. If the temperature drops below freezing, the machine may not work properly.
	In the event that the product is used in a manner that does not comply with the specified regulations, the product warranty may become invalid.
	Please check that the product works and performs well before using it.
	Minor scratches can occur during production. This is not a product defect, so you cannot return or exchange it.
	Users must operate the machine properly and strictly follow all safety precautions. We are not responsible for any product damage, malfunction, or personal injury resulting from misuse, mishandling, or improper care.
	We will not be held responsible for damage caused to product by misuse or poor care.
	Based on its product specification, there is some lubricant oil that comes out from the machine. It is a usual occurrence.
	Do not lean on the product or load it with heavy objects.

Go to the L3 Prime Precautions➜