2. Safety Precautions on Machine Operation

		Always wear safety glasses, a dust mask, and protective gloves when operating the machine. Fine dust and fumes generated during the engraving process may cause eye or respiratory irritation. Contact with hot or sharp surfaces may result in hand injuries.

		Laser Radiation Avoid eye or skin exposure to direct or scattered radiation.
	Keep hands and fingers away from the moving parts during operation. Getting caught in the machine's axis may cause serious injury.
	In order to prepare for an emergency, in case of a sudden machine malfunction or failure, users are strictly advised to not leave the machine unattended while in operation. Users should refrain from engaging in any activity that diverts his/her attention while actually engaged in operating the machine.
	Be sure to have a fire extinguisher readily available before starting any work.
	It is recommended to use a dust collector to remove particles generated during engraving.
	Ensure adequate ventilation when operating the machine.
	Depending on the material (pure silver), there may be differences in performance and quality in terms of marking and cutting.
	Although the product is calibrated as accurately as possible before shipment, a margin of error of less than ±1% may still occur.

PROPER MACHINE DISPOSAL

The machine contains valuable raw materials and electronic components which must be properly disposed of in equipment disposal containers.

According to European guidelines on proper equipment disposal:
●Do not dispose of together with household waste.
●Used electric and electronic equipment must be collected separately and not be placed in municipal waste.

Go to the L3 Prime Precautions➜