※L type clamp is sold separately.

Set the material against the fixing bracket. Be sure to place it properly.

Origin Point Setting

Set and position the L type clamp right at the center of the work area. The final alignment becomes the origin point of the L type clamp. Once the origin point is set, it is easy to return the L type clamp to its original position even after removal. If the vertical clamp is removed, the origin point must be set again.

1. Insert the clamp fixing pins (RP-0615) into the holes to secure the L type clamp.

2. Attach the L Type clamp to the clamp fixing pins.

3. Set the focus using the direction key (Z) buttons.

4. Once the focus is set, check whether the L type clamp is properly set or not. Adjust the position of the L type clamp if the focus is not properly set at the center.

Material Focus Setting

1. Place the material properly on the clamp.

2. Set the focus using the direction key (Z) buttons.

Go to the L3 Prime Descriptions➜