Keypad

Display	Status display
Operation Buttons	Activate the operations intended to perform
	Direction Key (X,Y/Z/A)	Marking area adjustment (X) Moves tilting angle (Y) Moves A axis
	Direction Key (Z)	Moves Z axis up and down
	Blower ON/OFF	Blower power button • Automatic control: The device starts automatically once the marking operation begins and stops automatically once the marking operation is completed. • Manual operation: Automatic control is deactivated if the device is manually switched on. Once the marking operation is completed, the device should be manually turned off.
	Auto Focus	• AUTO FOCUS: Short press to auto-focus the laser to the material height. Auto focus is activated once the program is connected. Only for flat marking Auto focus maximum measurement height: 55mm Auto focus cannot be used on materials that would not reflect red laser like acrylic, glass, red anodized aluminum, or chrome-plated pendants. • MENU: Long press to enter menu mode. 1: Product Info 2: Status LED Brightness 3: Reset Memory Long press and hold button (for more than 2 seconds) until it beeps to run the menu.
	Start	Start marking button • Start marking: Long-press (for 2 seconds) the button to start marking. • Repeat marking: Press the button to finish marking, then double-press (tap twice) the button to repeat marking.
	Stop	Stops/cancels marking