Machine

A	Status Indicator	Shows the status of the device via blinking interval
B	Power Switch	Turn on/off the power switch.
C	Safety Door	Opens/closes the cover automatically. ※The cover automatically opens once the program is connected.
D	Laser Safety Window	Protects the eyes from being exposed to laser light. ※Wavelength protection: 1064nm/Optical density: OD6
E	Scan Head	Laser Source Do not stare at the specular/diffuse reflection of laser. It may result in blindness.
F	Air assist nozzle	Air assist nozzle with airflow control ※Air assist nozzle is sold separately.
G	Docking station	Connects the rotary clamp to the machine.
H	Control Panel	Controls the power button and the manual control for regulating engraving operations.
I	Emergency Switch	Stops the machine during emergency.
J	External Adjustment Knob	Adjusts the position of the rotary clamp with a finger chuck handle.
K	Blower Hose Inlet	Connects the blower hose to the outlet to remove dusts and debris produced during marking operation.
L	Blower Power Port	To supply power to the blower by connecting it to the machine.(110~220V/2A) ※Auxiliary Power Device must be used if the external blower has more than 2 Ampere.
M	Power Port	To supply power to the machine. ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet.
N	USB Port	To connect USB cable to PC.
O	Air assist hose inlet	Ø6 air hose connection port