4. Focus pointer
Set the position of the head laser pointer and V laser pointer.
| L-wrench (2,3mm) |
 |
1EA | For setting the focus pointer |
- Select Focus Pointer in the Machine Settings.
- Position the head laser to the center of the work area. Use the direction key buttons to position it to the center. Then, click Next.
- Place the flat material on the work area and enter the thickness. Then, click Next.
- P Click ▶ button on the right to proceed in sequential order. ※Use a 2,3mm wrench.
Take note that the setting process involves 4 steps. Be sure to proceed with both left and right pointers in the same process.
