3. Tailstock
※Optional device; sold separately
Tailstock is used to firmly hold cylindrical materials in place. It is specifically used to avoid objects with cylindrical shapes such as pen, tumbler and wine glasses to tilt to one side during engraving process.
-Height (from bottom to central axis): 69mm
-Lateral distance (from left to right): 109.5mm
To set up the tailstock the following tools are needed:
| Tailstock (CP-251) |
 |
1EA | To hold pens in place. |
| Pen adapter (CP-251P) |
 |
1EA | To hold pens in place; it goes with a tailstock. |
| Tailstock fixing bolt (CP-251B) |
 |
1EA | For fastening the tailstock. |
| Pin (6Øx25mm) |
|
2EA | To secure the tailstock. |
How to set up the tailstock
- Insert the pin into the pin holes.
2. Secure the tailstock with a tailstock fixing bolt.
- Use the finger chucks of the rotary clamp to clamp your material. Once your material is clamped, push the tailstock to the right side until it touches the tip of your material. ※The device can slide left to right/right to left.
- Fasten the tailstock slide fixing bolt to secure your material.
