[MAGIC-E3] Package Contents & Specifications
1. Package Contents
MAGIC-E3 provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Cutter, tip and spindle belts easily wear out. Make sure to replace them regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
| Name | Picture | Qty | Usage |
| MAGIC-E3 |  |
1EA | Engraving machine **※**Be sure to use a safety mask and safety goggles during machine operation for safety. |
| Power adapter (CP-01& CP-02) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Cable (CP-11) |
 |
1EA | For connecting to PC |
| Program Installation USB |
 |
1EA | To install MagicEngrave software ※See program installation for further details. |
| User Manual |  |
1EA | Operating manual |
| T-wrench (2mm) (CP-T20) |
 |
1EA | For tightening/unscrewing the bolt. |
| L-wrench (1.5mm) (CP-L15) |
 |
1EA | For tightening/replacement of bolt. |
| L-wrench (2.5mm) (CP-L25) |
|
1EA | For tightening/replacement of bolt. |
| Ruler (CP-24) |
 |
1EA | For measuring the material. |
| Tool fixing bolt (M4x5) |
 |
3EA | To fasten the spindle tool. |
| Tension tip(4Ø) (T40-TA20) |
 |
1EA | For spindle: Tool used for engraving. |
| Endmill cutter(4Ø)(T40-E06) |  |
2EA | For spindle: Tool used for cutting. |
| Spindle belt(40Ø/40mm)(CP-SB40) |  |
3EA | For transferring DC motor’s rotation power to spindle. |
| Bakelite plate (120x100x2t) (CP-240S) |
 |
1EA | For calibrating the camera. |
| Multi-performance Clamp (CP-250) |
 |
1EA | To hold materials with different shapes in place. |
| Pin (CP-172) |
 |
6EA | To hold materials with irregular shapes in place. |
| Cutting clamp (CP-56) |
 |
1EA | To firmly hold materials in place during cutting process. |
| Cutting nose(4Ø)(CP-243N) |  |
1EA | Attached to the head: To protect tools and to cut at specific depth. |
Optional
*Purchased separately
| Name | Picture | Qty | Usage |
| Back Cover (CP-253) |
 |
1SET | Back Port Cover |
| Chip collector (CP-261 /CP-261N) |
 |
1SET | For collecting the debris like metal chips and dusts produced during engraving process. |
| Flatbed clamp (CP-370E3) |
 |
1SET | To hold materials like plates, blocks and various materials with different forms, sizes, and thicknesses, in place. |
| Pin clamp (CP-80) |
 |
1SET | To hold materials with different shapes in place. |
| Cutlery clamp (CP-83) |
 |
1SET | To firmly hold spoons in place. |
| Watch adapter (CP-84) |
 |
1SET | To firmly hold watch in place. |
| Bracelet adapter (CP-85) |
 |
1SET | To firmly hold bracelets in place. |
| Bar necklace adapter (CP-166) |
 |
1SET | Jig for holding materials with narrow width (about 2-3mm) in place. (Used for securing pendants, bar necklaces, etc.) |
| Brick adapter (CP-167) |
 |
1SET | To firmly hold brick in place. |
| Brick adapter (Shallow type) (CP-167S) |
 |
1SET | To firmly hold brick in place. |
| Curved tag adapter (CP-182) |
 |
1SET | Jig for holding curved materials in place. (Used for securing curved pendants, chain bracelets, etc.) |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
2. Specifications
| Operating voltage | AC 100~240V |
| Power consumption | 30W |
| Frequency | 50/60Hz |
| Dimensions | 310.5 mm(W) x 350.5 mm(D) x 324.5 mm(H) 12.2 in(W) x 13.8 in(D) x 12.8 in(H) |
| Max. engraving area | -Multipurpose clamp: 138mm x 100mm x 38.5mm(Z)/5.43in(X) x 3.93in(Y) x 1.51in(Z) -Flatbed clamp(Optional): 145mm(X) x 110mm(Y) x 38.5mm(Z) /5.70 in(X) x 4.33 in(Y) x 1.51in(Z) |
| Maximum material height | 42mm/ 1.65in |
| Weight | 20kg / 44.09 lb |
| RPM | 12,000 RPM |
| Spindle motor power | 27W |
| Bluetooth | Bluetooth LE module/ Bluetooth 5.0 |
| Transfer speed | 80mm/sec (X,Y), 18mm/sec (Z) |
| Temperature | 15 – 40°C |
| Humidity | 10 - 90% |
| Purposes | Metal engraving & cutting, etc. |