[JANUS] Package Contents and Specification
1. Package Contents
JANUS provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
| Name | Picture | Qty | Usage |
| JANUS |  |
1EA | Laser & CNC dual machine |
| Power Cable (CP-02) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Cable (CP-11) |
 |
1EA | For connecting to PC |
| Program Installation USB |
 |
1EA | To install MagicEngrave software ※See program installation for further details. |
| User Manual |  |
1EA | Operating manual |
| T-wrench(2mm) (CP-T20) |
 |
1EA | For tightening/unscrewing the bolt. |
| L-wrench(3mm) (CP-L30) |
 |
1EA | For setting the focus pointer and fixing the flat clamp guide. |
| L-wrench (1.5mm) (CP-L15) |
 |
1EA | Tool for tightening/replacement of bolt. |
| Ruler (CP-24) |
 |
1EA | For measuring the material. |
| Tool fixing bolt (M4x5) |
 |
3EA | To fasten the spindle tool. |
| L-tool fixing bolt (M3x4) |
 |
3EA | To fasten the L-tool tip. |
| Diamond tip(4Ø) (T40-DA22) |
 |
1EA | For spindle: Tool used for engraving. |
| Endmill cutter(4Ø) (T40-E06) |
 |
2EA | For spindle: Tool used for cutting. |
| Spindle belt (60Ø/60mm) (CP-SB60) |
 |
3EA | For transferring DC motor’s rotation power to spindle. |
| Finger chuck handle (CP-31) |
 |
2EA | To fasten the rotary clamp. |
| Flat finger chuck (CP-32) |
 |
3EA | For holding rings in place when engraving the inside or outside. |
| Round finger chuck (Wide width) (CP-33) |
 |
3EA | For holding rings in place when engraving the inside or outside. |
| Round finger chuck (Narrow width) (CP-34) |
 |
3EA | For holding rings in place when engraving on the inside. |
| Finger Chuck (4mm) (LMC-05-4) |
 |
3EA | For holding rings in place when marking the inside or outside. |
| Finger Chuck (2mm) (LMC-05-2) |
 |
3EA | For holding thin rings in place when marking the inside or outside. |
| Finger Skin (CP-41) |
 |
1SET | For protecting finger chuck. |
| Finger Chuck Spanner (CP-21) |
 |
1EA | For tightening/unscrewing the finger chuck. |
| Multi- performance Clamp (CM-50) |
 |
1EA | To hold materials with different shapes in place. |
| Flat clamp (CM-51) |
 |
1EA | Flat plate clamp for laser processing. (Includes guide and bolts) |
| Cutting clamp (CM-52) |
 |
1EA | To firmly hold materials in place during cutting process. |
| Tray |  |
1EA | Multi-purpose tray. |
| Cutting nose(4Ø) (CP-243N) |
 |
1EA | Attached to the head: To protect tools and to cut at specific depth. |
Optional
*Purchased separately
| Name | Picture | Qty | Usage |
| Blower Box (LMC-200) |
 |
1SET | Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. Do not connect or use products that exceed 2A. |
| Pin clamp (CP-80) |
 |
1SET | To hold materials with different shapes in place. |
| Ring adapter (CP-241) |
 |
1SET | For pen jig: To firmly hold rings in place when engraving the outside. |
| Cutlery clamp (CP-83) |
 |
1SET | To firmly hold spoons in place. |
| Watch adapter (CP-84) |
 |
1SET | To firmly hold watch in place. |
| Bracelet adapter (CP-85) |
 |
1SET | To firmly hold bracelets in place. |
| Bar necklace adapter (CP-166) |
 |
1SET | Jig for holding materials with narrow width (about 2-3mm) in place. (Used for securing pendants, bar necklaces, etc.) |
| Brick adapter (CP-167) |
 |
1SET | To firmly hold brick in place. |
| Brick adapter (Shallow type) (CP-167S) |
 |
1SET | To firmly hold brick in place. |
| Curved tag adapter (CP-182) |
 |
1SET | Jig for holding curved materials in place. (Used for securing curved pendants, chain bracelets, etc.) |
| Anti-Curling Clamp (CM-53) |
 |
1EA | For holding a thin plate in place. |
| Pen jig (CM-54) |
 |
1EA | For holding pens in place. (Includes 1 × Ø8 mm (0.31 in) pin for installation) |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
2. Specifications
| Model | Janus(MAGIC-JANUS) | |||
| Laser safety classification | Class 1 | |||
| Dimensions | 550 mm(W) x 600 mm(D) x 530 mm(H) / 22 in(W) x 24 in(D) x 21 in(H) | |||
| CNC | Stroke | 240 mm(X) × 120 mm(Y) × 60 mm (Z) / 9.4 in(X) × 4.7 in(Y) × 2.3 in(Z) | ||
| Head Configuration | Tension head, probe (motor-driven), L-tool, spindle, DC motor, LED | |||
| Spindle motor power | 37.9 W | |||
| Work Area (Multipurpose Clamp) | 120 mm(X) × 100 mm(Y) × 60 mm (Z) / 4.7 in(X) × 3.9 in(Y) × 2.3 in(Z) | |||
| Laser | Stroke (Z-axis) |
80mm / 3.15in | ||
| Laser Source | 30W mopa | 60W mopa | ||
| Lens Working Distance (WD) | 165 mm / 6.50 in | 198 mm / 7.79 in | ||
| Lens Working Area (X × Y) | 110 mm(X) × 110 mm(Y) / 4.33 in(X) × 4.33 in(Y) | |||
| Work Area (Multipurpose Clamp) | 110 mm(X) × 110 mm(Y) × 73 mm (Z) / 4.33 in(X) × 4.33 in(Y) × 2.87 in(Z) |
110 mm(X) × 110 mm(Y) × 40 mm (Z) / 4.33 in(X) × 4.33 in(Y) × 1.57 in(Z) |
||
| Rotary clamp | 0°~30° Tilting / Ring o Bangle o (Ø65mm or less) | |||
| Weight | 70kg | |||
| Power consumption | <500W | <600W | ||
| Cooling system | Air-cooling type | |||
| Frequency | 50/60Hz | |||
| Operating voltage | AC 100~240V | |||
| Blower Power Inlet | 100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
| Temperature | 0 – 40 ℃ | |||
| Humidity | 10 - 85 % | |||
| Purposes | Metal material marking and cutting, pen marking, and inner and outer diameter marking of metal rings. |