[MAGIC-L3 Prime] Package Contents & Specifications
1. Package Contents
MAGIC-L3 Prime provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
| Name | Picture | Qty | Usage |
| L3 Prime |  |
1EA | Laser marking&cutting machine |
| Power adapter (EW-20) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Cable (EE-13) |
 |
1EA | For connecting to PC |
| Program Installation USB |
 |
1EA | To install MagicEngrave software ※See program installation for further details. |
| Quick manual |  |
1EA | Operating manual |
| Clamp (CL-22) |
 |
1SET | Support for material positioning. |
| Clamp Bolt (M5-12mm) (TL-512N) |
 |
4EA | To fasten the clamp. |
| L-wrench (4mm) (CO-L40) |
 |
1EA | For tightening/replacement of bolt. |
| L-wrench(3mm) (CO-L30) |
|
1EA | For setting the focus pointer. |
| L-wrench (2mm) (CO-L20) |
|
1EA | For setting the focus pointer. |
| Ruler (CO-22) |
 |
1EA | For measuring the material. |
| Clamp Pin (6Ø)(RP-0615) |  |
2EA | To secure the medal clamp. |
Optional
*Purchased separately
| Name | Picture | Qty | Usage |
| Air assist nozzle (CL-23) |
 |
1EA | Air nozzle with a flow control lever |
| Auto tilt Rotary Clamp (CL-15) |
 |
1SET | For holding ring materials in place. ※4mm chuck finger is included. |
| Medal Clamp (CL-16) |
 |
1SET | For holding materials with various shapes in place. |
| Medal Clamp (Center fixing type) (CL-17) |
 |
1SET | For holding materials with various shapes in place. |
| Anti-Curling Clamp (CL-18) |
 |
1EA | For holding a thin plate in place. |
| Auto-tilting bangle clamp (CL-19) |
 |
1EA | Bangle material fixing clamp |
| L type clamp (CL-20) |
 |
1EA | For holding materials with various shapes in place. |
| Honeycomb Table (CL-21) |
 |
1SET | For holding materials in place during cutting process. |
| Pen clamp (LMC-171) |
 |
1SET | Multi-Pen engraving clamp |
| Signet ring adapter (LMC-164) |
 |
1SET | Adapter for aligning signet rings for engraving. |
| Blower Box ( Ø75) (CL-100) |
 |
1SET | Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. Do not connect or use products that exceed 2A. |
| Auxiliary Power Device (LMC-101) |
 |
1SET | Auxiliary Power Device must be used if the external blowers or dust collectorshave more than 2 Ampere. |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
2. Specifications
| Model | L3 Prime-60W | L3 Prime-100W | ||
| Laser safety classification | Class 1 | |||
| Dimensions | 394 mm(W) × 577 mm(H) × 609 mm(D)/ 15.5in × 22.7in × 24in | |||
| Max. engraving area | 110mm x 110mm / 4.3in x 4.3in | |||
| Maximum material height | 100mm / 4in | |||
| Maximum Z-axis height | 95mm / 4in | |||
| Effective space inside the chamber |
350 mm(W) x 170 mm(D) x 100 mm(H) / 13.7 in(W) x 6.7 in(D) x 4 in(H) | |||
| Safety cover height (When open) |
266 mm / 10.5 in (From base plate) | |||
| Maximum material weight | 20kg (44 lbs) | |||
| Weight | 50kg (110 lbs) | 54kg (119 lbs) | ||
| Power consumption | 520W | 730W | ||
| Cooling system | Air-cooling type | |||
| Camera | 13MP | |||
| Frequency | 50/60Hz | |||
| Operating voltage | AC 100~240V | |||
| Blower power port | 100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
| Temperature | 0 – 40 ℃ | |||
| Humidity | 10 - 85% | |||
| Purposes | Metal engraving & cutting, Pen engraving, Ring engraving (inside), Ring engraving (outside), etc. |