[MAGIC-L3] Package Contents and Specifications
1. Package Contents
MAGIC-L3 provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
| Name | Picture | Qty | Usage |
| MAGIC™-L3 |  |
1EA | Laser marking machine |
| Power adapter (CP-02) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Cable (CP-11) |
 |
1EA | For connecting to PC |
| Program Installation USB |
 |
1EA | To install MagicEngrave software ※See program installation for further details. |
| User Manual |  |
1EA | Operating manual |
| Clamp (LMB-21) |
 |
1SET | Support for material positioning. |
| Clamp Bolt (M5-12mm) (LMB-21B) |
 |
4EA | To fasten the clamp. |
| L-wrench (4mm) (CP-L40) |
 |
1EA | For tightening/replacement of bolt. |
| L-wrench(3mm) (CP-L30) |
|
1EA | For setting the focus pointer. |
| L-wrench (2mm) (CP-L20) |
|
1EA | For setting the focus pointer. |
| Ruler (CP-24) |
 |
1EA | For measuring the material. |
| Clamp Pin (6Ø)(LMC-11) |  |
2EA | To secure the medal clamp. |
Optional
*Purchased separately
| Name | Picture | Qty | Usage |
| Power Cable (Right angled) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Extension Cable (Left angled) (LMC-36) |
 |
1EA | For connecting to PC |
| Back cover (LMC-253) |
 |
1EA | For protecting the port from scratches. ※Use the power cable (Right angled) and USB cable (Left angled). |
| Medal Clamp (LMB-102) |
 |
1SET | For holding materials with various shapes in place. |
| Medal Clamp (Center fixing type) (LMC-020) |
 |
1SET | For holding materials with various shapes in place. |
| L type clamp (LMB-101) |
 |
1EA | For holding materials with various shapes in place. |
| Auto tilt Rotary Clamp (LMC-161) |
 |
1SET | For holding ring materials in place. ※4mm chuck finger is included. |
| Auto-tilting bangle clamp (LMC-165) |
 |
1EA | Bangle material fixing clamp |
| Honeycomb Table (LMC-071) |
 |
1SET | For holding materials in place during cutting process. |
| Anti-Curling Clamp (LMC-031) |
 |
1EA | For holding a thin plate in place. |
| Blower Box (LMC-200) |
 |
1SET | Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. Do not connect or use products that exceed 2A. |
| Auxiliary Power Device (LMC-101) |
 |
1SET | Auxiliary Power Device must be used if the external blowers or dust collectorshave more than 2 Ampere. |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
2. Specifications
| Model | L3-30W | |||
| Laser safety classification | Class 1 | |||
| Dimensions | 404 mm(W) x 590 mm(D) x 556 mm(H) / 16 in(W) x 23 in(D) x 22 in(H) | |||
| Max. engraving area | 110mm x 110mm / 4.3in x 4.3in | |||
| Maximum material height | 100mm / 3.94in | |||
| Maximum Z-axis height | 100mm / 3.94in | |||
| Effective space inside the chamber |
350 mm(W) x 170 mm(D) x 100 mm(H) / 13.7 in(W) x 6.6 in(D) x 3.9 in(H) | |||
| Safety cover height (When open) |
266 mm / 10.4 in (From base plate) | |||
| Maximum material weight | 20kg | |||
| Weight | 46kg | |||
| Power consumption | 340W | |||
| Cooling system | Air-cooling type | |||
| Frequency | 50/60Hz | |||
| Operating voltage | AC 100~240V | |||
| Blower power port | 100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
| Temperature | 0 – 40 ℃ | |||
| Humidity | 10 - 90% | |||
| Purposes | Metal engraving & cutting, Pen engraving, Ring engraving (inside), Ring engraving (outside), etc. |