[MAGIC-S4] Package Contents & Specifications
1. Package Contents
MAGIC-S4 provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Cutter, tip and spindle belts easily wear out. Make sure to replace them regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
| Name | Picture | Qty | Usage |
| MAGIC-S4 |  |
1EA | Engraving machine **※**Be sure to use a safety mask and safety goggles during machine operation for safety. |
| Power adapter (CP-01& CP-02) |
 |
1EA | Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
| USB Cable (CP-11) |
 |
1EA | For connecting to PC |
| Program Installation USB |
 |
1EA | To install MagicEngrave software ※See program installation for further details. |
| User Manual |  |
1EA | Operating manual |
| T-wrench (2.5mm) (CP-T25) |
 |
1EA | For tightening/unscrewing the bolt. |
| L-wrench (4mm) (CP-L40) |
 |
1EA | For tightening/replacement of bolt. |
| Ruler (CP-24) |
 |
1EA | For measuring the material. |
| Tool fixing bolt (M4x5) |
 |
3EA | To fasten the spindle tool. |
| Diamond tip(4Ø) (T40-DA22) |
 |
1EA | For spindle: Tool used for engraving. |
| Flatbed clamp set (CP-370S4) |
 |
1SET | To hold materials like plates, blocks and various materials with different forms, sizes, and thicknesses, in place. |
| Bakelite plate (120x100x2t) (CP-240S) |
 |
1EA | For calibrating the camera. |
| Height adjustable clamp (CP-252) |
 |
1EA | To adjust the height of the clamp. |
Optional
*Purchased separately
| Name | Picture | Qty | Usage |
| Back Cover (CP-253) |
 |
1SET | Back Port Cover |
| Multi-performance Clamp (CP-250) |
 |
1EA | To hold materials with different shapes in place. |
| Pin (CP-172) |
 |
6EA | To hold materials with irregular shapes in place. |
| Pin clamp (CP-80) |
 |
1SET | To hold materials with different shapes in place. |
| Cutlery clamp (CP-83) |
 |
1SET | To firmly hold spoons in place. |
| Watch adapter (CP-84) |
 |
1SET | To firmly hold watch in place. |
| Bracelet adapter (CP-85) |
 |
1SET | To firmly hold bracelets in place. |
| Bar necklace adapter (CP-166) |
 |
1SET | Jig for holding materials with narrow width (about 2-3mm) in place. (Used for securing pendants, bar necklaces, etc.) |
| Curved tag adapter (CP-182) |
 |
1SET | Jig for holding curved materials in place. (Used for securing curved pendants, chain bracelets, etc.) |
| L-Type Clamp (CP-60) |  |
1SET | Clamp for securing locks to the flatbed (work area). |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
2. Specifications
| Operating voltage | AC 100~240V |
| Power consumption | 24W |
| Frequency | 50/60Hz |
| Dimensions | 402.5 mm(W) x 376.5 mm(D) x 352.5 mm(H) 15.8 in(W) x 14.8 in(D) x 13.9 in(H) |
| Max. engraving area | -Plate-bed clamp: 216mm x 158mm x 38.5mm(Z)/8.50 in(X) x 6.22 in(Y) x 1.51 in(Z) -Multi-purpose clamp(Optional):140mm(X) x 100mm(Y) x 38.5mm(Z)/ 5.51 in(X) x 3.93 in(Y) x 1.51 in(Z) |
| Maximum material height | 60mm/ 2.36 in |
| Weight | 25kg/ 55.11lb |
| Bluetooth | Bluetooth LE module/ Bluetooth 5.0 |
| Transfer speed | 80mm/sec (X,Y), 18mm/sec (Z) |
| Temperature | 15 – 40°C |
| Humidity | 10 - 90% |
| Purposes | Metal engraving, etc. |