Contents

• 1. Machine
• 2. Clamp
• 3. Keypad
• 4. Menu
• 5. Display
• 6. Status indicator
• 7. Switching tools
• 8. Pressure Lock
• 9. Spindle Belt Replacement

1. Machine

Protect your hands, wrists and fingers.
Do not put any of your body parts inside the machine or anywhere near the head during operation.

Back to the contents➜

2. Clamp

1) Multipurpose Clamp

The package includes a multifunctional clamp that is easily assembled, disassembled and transformed into 3 different types of clamps. It can be adjusted according to the height of the material, and can be expanded according to the material’s thickness, size, and shape. This single clamp alone makes engraving on various materials possible without the use of any additional clamps.

How to secure the material in place

Use the clamping knob to secure your material in place. To loosen or widen the clamp, turn the clamping knob counterclockwise; to fasten it, turn the knob clockwise.

Marks may be left on the material if fastened tightly.

How to position the material

Use the vertical ruler bar as an alignment guide to help you position and align your material to the clamp with ease and accuracy. Properly place your material on the clamp then check the alignment.

How to secure the material with irregular shape in place

Use the clamping pins to firmly hold materials with irregular shapes in place. To secure the clamping pins to the clamp, simply insert the pins into the pin holes then fasten them.

How to adjust the height of the clamp

Below are instructions on how to adjust the height of the clamp according to the thickness of the material.

1. Turn the clamp over (to the back) then screw the bolts (M4x20mm). ※Use a 3mm L-wrench to screw the bolts.

2. Turn the clamp over (to the front) then pull out the clamp base.

3. Remove the clamping pins then secure the material to the V groove of clamp without clamp base. (See picture below for reference).

Height Adjustable Clamp

Height adjustable clamp is used to adjust the height of your material.

Height adjustable clamp (CP-252)

1EA

To adjust the height of the clamp.

1. Turn the Height Adjustable clamp clamping knob counterclockwise to detach the Multipurpose Clamp.

2. Turn the clamping knob counterclockwise to detach the height adjustable clamp.

3. Attach the multipurpose clamp then fasten it by turning the clamping knob clockwise.

How to adjust the height of the clamp

※Optional device; sold separately
Below are instructions on how to adjust the height of the clamp according to the thickness of the material.

Spacer block (CP-250S)

1EA

To adjust the height of the clamp.

1. Turn the clamping knob counterclockwise to detach the clamp.

2. Turn the clamp over (to the back) then screw the bolts (M4x20mm). ※Use a 3mm L-wrench to screw the bolts.

3. Once the bolts are removed, turn the clamp over (to the front) then pull out the clamp base. Then, reassemble the spacer block to pin.

※ After secure the spacer block, then secure the material to the V groove of clamp.

4. Screw the spacer block fixing bolt (M4x20mm). ※Use a 3mm L-wrench to unscrew the bolts.

5. Secure the base clamp by attaching it to the pins.

6. Turn the clamp over (to the back) then unscrew the bolts (M4x40mm).
   ※Use a 3mm L-wrench to unscrew the bolts.

※ To assemble or reassemble the spacer block, use the appropriate bolts. Be sure to use and secure the spacer block using the correct type of bolts.

Spacer block fixing bolt- M4x20mm	Clamp base fixing bolt- M4x40mm

Optional items for Multipurpose Clamp

1. Pin clamp

※Optional device; sold separately

Pin clamp (CP-80)		1SET	To hold materials with different shapes in place.
Pin (CP-172)		5EA	To hold materials with irregular shapes in place.
Wrench bolt (M4x6)		5EA	To fasten the clamp.
L-wrench(3mm) (CP-L30)		1EA	For tightening/unscrewing the bolt.

2. Cutlery clamp

※Optional device; sold separately

Cutlery clamp (CP-83)

1SET

To firmly hold spoons in place.

3. Watch adapter

※Optional device; sold separately

Watch adapter (CP-84)		1SET	To firmly hold watch in place.
Wrench bolt		5EA	To fasten the adapter.
L-wrench(3mm) (CP-L30)		1EA	For tightening/unscrewing the bolt.

4. Bracelet adapter

※Optional device; sold separately

Bracelet adapter (CP-85)		1SET	To firmly hold bracelets in place.
Pin		4EA	To secure the adapter.

5. Bar necklace adapter

※Optional device; sold separately

Bar necklace adapter (CP-166)		1SET	Jig for holding materials with narrow width  (about 2-3mm) in place. (Used for securing pendants, bar necklaces, etc.)
Pin		4EA	To secure the adapter.

*Materials like bar necklaces or pendants may come off easily when attaching to the jig. 
Press the material with your finger to secure it to the jig and be sure to not let your finger get caught while pressing. 

6. Brick adapter

※Optional device; sold separately

Brick adapter (CP-167)		1SET	To firmly hold brick in place.
Wrench bolt		4EA	To fasten the adapter.

7. Brick adapter (Shallow type)

※Optional device; sold separately

Brick adapter  (Shallow type) (CP-167S)		1SET	To firmly hold brick in place.
Wrench bolt		5EA	To fasten the adapter.
L-wrench		1EA	For tightening/unscrewing the bolt.

8. Curved tag adapter

※Optional device; sold separately

Curved tag adapter (CP-182)		1SET	Jig for holding curved materials in place. (Used for securing curved pendants, chain bracelets, etc.)
Pin		4EA	To secure the adapter.

2) Rotary Clamp

※Basic Installation
MAGIC™-E7’s package includes a rotary clamp that is used for engraving the inside and outside of a ring.

How to activate ring engraving mode

Press the rotary clamp button to activate ring inside/outside engraving mode.

How to secure the ring in place

When engraving the outside
Place the ring onto the finger chucks. Rotate the rotary clamp to outward-inward directions to lock and secure the ring in place. Make sure that the ring is firmly attached and locked so it won’t fall off or spin during operation.

When engraving the inside
Insert the ring in between the finger chucks. Rotate the rotary clamp to inward-outward directions to lock and secure the ring in place. Make sure that the ring is firmly attached and locked so it won’t fall off or spin during operation.

Finger Chuck Types

There are three types of finger chucks available to match the shape and size of the ring.

Flat chuck finger ※Included in the package	Round chuck finger (wide) ※Included in the package	Round chuck finger (narrow) ※Sold separately

How to replace finger chucks

Choose the appropriate finger chucks for your ring. Insert the finger chucks into the holes then fasten them tightly with the use of a finger chuck spanner. ※The finger chuck spanner is included in the package.

3) Tailstock

※Optional device; sold separately

Tailstock is used to firmly hold cylindrical materials in place. It is specifically used to avoid objects with cylindrical shapes such as pen, tumbler and wine glasses to tilt to one side during engraving process.

-Height (from bottom to central axis): 69mm
-Lateral distance (from left to right): 109.5mm

To set up the tailstock the following tools are needed:

Tailstock (CP-251)		1EA	To hold pens in place.
Pen adapter (CP-251P)		1EA	To hold pens in place; it goes with a tailstock.
Tailstock fixing bolt (CP-251B)		1EA	For fastening the tailstock.
Pin (6Øx25mm)		2EA	To secure the tailstock.

How to set up the tailstock

1. Insert the pin into the pin holes.

 
2. Secure the tailstock with a tailstock fixing bolt.

3. Use the finger chucks of the rotary clamp to clamp your material. Once your material is clamped, push the tailstock to the right side until it touches the tip of your material. ※The device can slide left to right/right to left.

4. Fasten the tailstock slide fixing bolt to secure your material.

Ring Adapter

※Optional device; sold separately.

Ring adapter is used to secure the ring when engraving the outside of the ring. It is attached to the tailstock and the rotary clamp to firmly hold the ring in place during engraving process.

Ring adapter (CP-241)		1EA	For jig: To firmly hold rings in place when engraving the outside.
Collet for rings		1SET	For size expansion: 9 types of collets are provided for different ring sizes.

How to set up the ring adapter

1. Turn the fixing nut counterclockwise to detach the ring adaptor. 

2. Insert the ring into the collet to match the size. 

There are nine types of (expandable) collets available for different ring sizes.

3. Attach and secure the collet into the ring adapter by turning the fixing nut clockwise. 

4. Loosen the chuck fingers by turning the rotary clamp then insert the ring adapter.

4) Cutting Clamp

Cutting Clamp (CP-56)

1. Place the material on the cutting clamp. Secure the material to the cutting clamp by using the fixing knobs then fasten the fixing knobs with the fixing bars.

2. Fit the cutting clamp on the base clamp then secure it. To loosen or widen the gap for clamping, turn the clamping knob counterclockwise. To tighten or secure it, turn the clamping knob clockwise
   After installing the Height Adjustable clamp, secure the cutting clamp to the clamp.

Cutting Clamp (CP-243)

※Optional device; sold separately

Cutting clamp (CP-243)		1EA	To firmly hold materials in place during cutting process.
Cutting nose(4Ø) (CP-243N)		1EA	Attached to the head:To protect tools and to cut at specific depth.
Pincette		1EA	For picking the workpiece safely; to avoid picking the workpiece by hand.
Scraper		1EA	For scraping chips.

How to set up the cutting clamp

1. Widen the gap on the clamp by turning the clamping knob counterclockwise. Place the cutting clamp onto the clamp then fasten it by turning the knob clockwise.

2. Use the cutting clamp knobs to widen or tighten the gap in between the cutting clamp.

3. Put your material on the cutting clamp then secure it by using the fixing bars.

4. Hold both ends of the fixing bar then push it inward to adjust to the size of your material. Once the fixing bar is set, turn the fixing knob clockwise to fasten it.

※Make sure that your material is fixed to the cutting clamp. The fixing bar should be fastened tightly to secure your material.

Back to the contents➜

3. Keypad

Display		Status display
Operation Buttons		Activate the operations intended to perform
		Direction Key (X,Y/Z/A)	Engraving area adjustment (X) Moves X axis (Y)(Z)(A) Moves Y/Z/A axis ※Axis movement can be changed by using the operation buttons.
		Vacuum ON/OFF	Chip collector power button • Automatic control: The device starts automatically once the engraving operation begins and stops automatically once the engraving operation is completed. • Manual operation: Automatic control is deactivated if the device is manually switched on. Once the engraving operation is completed, the device should be manually turned off. ※ We strictly advise our users to use the Chip collector during engraving operation for safety. The Chip collector prevents exposure form harmful inhalable particles and debris like metal chips and dusts which may cause eye injury if they get stuck in the eye or respiratory problems if inhaled.
		Start	Start marking button • Start marking: Long-press (for 2 seconds) the [Start] button to start marking. • Repeat marking: Press the [Start] button to finish marking, then double-press (tap twice) the [Start] button to repeat marking. • Menu: Press OK when using the menu.
		Menu	Enter the menu mode
		Stop	Stops/cancels marking

Back to the contents➜

4. Menu

To enter Menu mode, press  button. Select a menu item using the  and  buttons then press button to enter the menu item.

Back to the contents➜

5. Display

The display shows the status, functions, mode, and check messages. Icons are displayed differently depending on the selected function. The four buttons at the bottom represent different functions and each function vary depending on the selected mode.

1) Standby-Flat

	Status
	Bluetooth	Icon appears when Bluetooth is activated
	Auto Zref on Repeat	: No measurement : Height measurement only : Height measurement + area check
	Chip collector Power	Chip collector ON/OFF: Icon does not appear when OFF
	Focus Pointer	Laser pointer ON/OFF
	Front Cover	Selects whether to use the front cover or not. ※Optional device; sold separately
XY:#1-C	X-Y Origin	X-Y origin •#1: Clamp No. (1-5) •C: Origin No. (C: Center; origin No.: 1-8)
	Spindle power	Adjusts the spindle power (50~100%).

	Mode
	Flat Mode	Switches to flat mode
	Rotary Mode	Switches to Rotary mode • The mode changes in sequence (OUTER DIAMETER → INNER DIAMETER → OUTER DIAMETER) in a loop whenever the button is clicked. • Switched to the INNER DIAMETER mode instantly if double-clicked
	Tool change	Switches to tool change mode
	Auto focus	Activates camera auto focus position • Auto moves to view position after height measurement • Refreshes the camera display at MagicEngrave. ※Variety of features available for use once MagicEngrave software is enabled.

2) Standby–Rotary

	Mode
	Rotary Mode	Switches to rotary mode : Changes to rotary inner diameter mode : Changes to rotary outer diameter mode
	Finger Mode	The mode changes in sequence (Flat finger → Round finger → cylinder) in a loop whenever the button is clicked. Flat Finger Round Finger Cylinder (Used for cylinder engraving / ring cutting)

3) Move Mode-Flat

Press one of the buttons in the [STANDBY] mode to activate [MOVE].

	Mode
	Standby Mode	• Switches to the STANDBY mode  • Switches automatically to [STANDBY] mode if not in use for 10 seconds. Press any buttons to activate [MOVE] mode.
	Save Origin	Saves the current position as the XY origin *Short-press: Temporary save *Long-press: Permanent save Y-axis movement mode: Save XY Origin Z-axis movement mode: Save Z Origin A-axis movement mode: Save A Origin
	Laser Pointer	Turns ON/OFF the laser pointer
	UP-DOWN Button Settings	The mode changes in sequence (Y-axis → Z-axis → A-axis → Y-axis) in a loop whenever the button is clicked.

4) Move Mode-Rotary

Press one of the buttons in the [STANDBY] mode to activate [MOVE].

	Mode
	Standby Mode	• Switches to the STANDBY mode  • Switches automatically to [STANDBY] mode if not in use for 10 seconds. Press any buttons to activate [MOVE] mode.
	Save Origin	Saves the current position as the XY origin *Short-press: Temporary save *Long-press: Permanent save • If (A-axis mode): If the laser pointer is ON, the laser pointer position of the current finger is saved as the origin. • If (Z-axis mode): The SAVE ORIGIN icon changes to ‘ ’, and the curent Z-axis position is saved as the origin. - Outer diameter mode: Z-axis origin of outer diameter - Inner diameter mode: Z-axis origin of inner diameter
	UP-DOWN Button Settings	The mode changes in sequence (A-axis → Z-axis) in a loop whenever the button is clicked.

5) Engraving mode

	Engraving Speed Control	Reduces engraving speed by 1mm/s whenever the button is pressed.
		Increases engraving speed by 1mm/s whenever the button is pressed.
	Spindle Speed Control	Reduces spindle speed by 10% whenever the button is pressed.
		Increases spindle speed by 10% whenever the button is pressed.

6) Pause

	Mode
	Return back to Previous position	Returns back to the previous position and resumes engraving.
	Tool Change	Switches to tool change mode
	Resume	Resumes engraving.

Back to the contents➜

6. Status Indicator

The status indicator is placed at the bottom left side and bottom right side of the machine. It is used to indicate the status of the device.

The machine displays flashing or blinking lights to show its current status. The lights displayed indicate the following status: 

Status	Blinking Interval
Waiting
Engraving
Operating
Notification
Error

Press button (for 2 seconds) to enter menu mode.

Select [8. Adjust Brightness] then press  button.

Select [1. Status LED] then press  button.

Adjust the brightness using the (Direction X) buttons.

Back to the contents➜

7. Switching Tools

Do not let any of your body parts or any foreign objects get caught in the machine during operation. 

The tools of the machine are sharp, and may cause serious physical injury.

Please wear safety glasses during engraving process for safety. 

Debris like metal chips and dusts may cause serious eye injury if they get stuck in the eye.

Spindle

Name	Picture	Quantity	Usage
T-wrench (2mm)		1EA	Tool for tightening/unscrewing of bolt.

As shown below, insert the 2mm wrench into the fixing bolt. Turn the wrench to the left to unscrew bolt. To prevent the tool from falling to the floor, grab tool with your hand then pull it out. Once the tool is removed, replace it with a new tool then secure it using a wrench for tightening bolts. ※See package contents

When unscrewing the tool fixing bolt, hold the tool with your hand while unscrewing to avoid the bolt from dropping on the floor.

L-Tool

Name	Picture	Quantity	Usage
L-wrench (1.5mm)		1EA	Tool for tightening/replacement of bolt.
L-tool fixing bolt (M3x4)		3EA	L-tool tip fixing bolt

As shown below, insert the 1.5mm wrench into the fixing bolt. Turn the wrench to the left to unscrew bolt. To prevent the tool from falling to the floor, grab tool with your hand then pull it out. Once the tool is removed, replace it with a new tool then secure it using a wrench for tightening bolts. ※See package contents

Back to the contents➜

8. Pressure Lock

Setting Machine Pressure Lock

Lock the pressure lock when cutting or engraving materials with a V cutter to reduce vibration during engraving for enhanced cutting and engraving quality, and to extend the life of the tools. Turn the pressure lock clockwise to lock then turn it counterclockwise to unlock/release pressure.

[When using endmill/ V-cutter etc.]	[When using diamond/ carbide tip]

Pressure is needed when engraving with a diamond/carbide tip tool. Hence, tension must be unlocked to release pressure.

Pressure Adjuster

When engraving with a diamond/carbide tip, adjust the depth by pressure. This has the same effect as assigning the engraving depth when creating a tool path. To increase pressure, turn the pressure adjuster counterclockwise; to decrease pressure, turn it clockwise

Back to the contents➜

9. Spindle Belt Replacement

The spindle belt transmits the rotational force of the spindle motor to the spindle to enable fast rotation of the blades. Worn out spindle belts cause the surface to crack and slip, causing the spindle motor to fail or function properly. If the force is not transmitted properly, the spindle’s rotational speed will decrease, leading to poor engraving performance and quality. Additionally, a damaged spindle belt has the potential to cause the tool to break.

• Spindle Belt Size: 50Ø (50mm)

• Replacement Cycle: The lifespan of the spindle belt is contingent upon the conditions of use, but it should be replaced at the latest every two to three months.

Spindle Belt Replacement Method

1. Remove the L-tool fixing bolt by turning it counterclockwise.

2. Remove the head cover by unscrewing the 8 bolts on both and back sides using a 2.5mm wrench.

3. You will see a red rubber belt attached around the head. Remove this belt then replace it with a new one.

4. Put back the head cover then screw the bolts using the wrench. Fasten the L-tool fixing bolt by turning it clockwise.

Back to the contents➜

E7 Main➜